Storyboard

The walls, made of SIP panels, are supported by beams fixed to the foundation slab. These include spaces for windows, and the beams do not cover the areas where doors will be placed.

>Model

ID:(124, 0)

Description

>Top

The diagram of the SIP panel walls, according to the design by Thermomuro, is shown below:

The total areas are:

This means that the productivity is approximately $12.3 m^2$ per day.

The elements of the external walls are shown below:

While the elements of the internal walls are:

ID:(843, 0)

Description

>Top

The walls began to be assembled from the secondary bedroom in a counterclockwise direction:

So far, part of the living/dining area has been covered:

Meanwhile, the magnificent view is already visible:

In this image, you can see the beams placed on the foundation slab, fitting into the base of the SIP panels:

ID:(840, 0)

Description

>Top

The progress corresponds to the mezzanine of the northwest module, which is completely covered:

The kitchen module is still not covered:

Nor are the bedroom modules covered:

From the mezzanine of the northwest module, you can see what will be the living and dining area:

From the southern end of the mezzanine, you can observe the surface:

And the area where the mezzanine over the kitchen and bedrooms will be located:

ID:(841, 0)

Description

>Top

Finally, the external and internal walls have been completed:

The view in the northwest direction is:

and the view in the southeast direction is:

From the outside, you can see the dining and living areas:

ID:(842, 0)