Storyboard

The connection is made to the network maintained by SAESA (Sociedad Austral de Electricidad Sociedad Anónima) via a pole located near the house, on the west side of the property. There will be two connections: one for lighting and another for heating, which will be electric.

>Model

ID:(134, 0)

Definition

>Top

The mast for connecting to the SAESA network is located near the house of Rafael and Soledad, our neighbors to the west. The pole is numbered SE 101668, which is needed to request the two connections: one for electricity and the other for the special heating rate:

ID:(859, 0)

Definition

>Top

For the assembly, you can work with one or two posts. In the second case, the length of the cables can be reduced, which helps with the stability of the installation. The entry point to the house would correspond to the beam used for lifting loads.

Since the entry point to the house will be on the beam for lifting loads, it is necessary to ensure that the installation prevents accidental access to the cables. Therefore:

It is important to remember that actions such as hanging, unhooking, and operating the pulley system will be carried out using some type of bar or hook, and it should not damage the connection or endanger the person performing the maneuver.

ID:(860, 0)