User:
Error in eaves
Storyboard 
The initial news was that the team had been delayed because some pieces from Thermomuro were faulty and had to be corrected. However, a review of the information showed that the pieces were actually fine and the correction had removed the eaves. This can be seen both in the already installed roof and in the cut SIP remnants inside the house.
Subsequently, the "correction" was corrected, restoring the eaves as originally designed.
ID:(137, 0)
Definition of eaves
Description
If you study the plans and specifications from Thermomuro, you can see that the entire roof is designed with eaves. These eaves vary between the exterior (north) and interior (south) parts and are also present on the lateral sides.
However, after assembling the roof, the eaves on the ends are missing.
ID:(872, 0)
Cutting problem
Description
Once the roof was assembled, it became evident that the ends of the roof lack eaves. A review revealed that the initial claim that the pieces were cut incorrectly and needed correction resulted in the removal of the eaves. In other words, the corrections caused the errors:
By examining the roof and the Thermomuro plan, it is clear that an entire strip (orange line) was cut incorrectly.
ID:(873, 0)
Bedroom module without spoilers
Description
Initially, the bedroom module is presented without side eaves:
ID:(874, 0)
Corrected bedroom module
Description
Once the problem is corrected, tiles are installed on a roof that now has a side eave:
ID:(875, 0)
Study module to be corrected
Description
However, the study module still needs to be corrected as it lacks its eave:
ID:(876, 0)