User:
The Drawings
Image 
Called layout drawings??
Review
- Rough openings
- Support
- Points loads!!
Type of package
- Site cut
Yield and panel nesting
ID:(186, 0)
Panel Prep
Image
Safety
- Feet on the ground
Crane time (sleeping operator)
Find manufacturing errors
Preassembly
ID:(187, 0)
A Good Place to Start
Image
Corner
Bracing requirements
- Minimal
- Straightening still required
Wind
SIP = Sail
ID:(188, 0)
Floor Systems
Image
Safety
OSHA specs
Walls vs. roof
Windows and doors
Temporary holes strapping
Roof rigging
Flat vs. pitched
- WInd tag line
Finding a handle
Panel adjustment while still attached
ID:(190, 0)
Electrical and Other Trades
Image
Communicate
Site meeting prior to start
Explanation of the system
Panel adjustments to accommodate other trades
Helping the electrician vs. unnecessary cost increases
ID:(192, 0)
Seal as you go
Image
Think like a molecule of air
Use you building sciences knowledge
- Mastic
- Foam (one- and two-part)
- Gaskets
ID:(194, 0)
Weather Issues
Image
When to seal if panels are wet
Sealing and a weather-tight roof
SIP tape sticking or not
ID:(195, 0)
Planning for Efficiency
Image
Staging in order
Line of sight
Access to staging area
Plumbing and straightening walls
Sealing too soon
Panel joint layout vs. joint growth
Setting last wall panel using the corner
ID:(196, 0)
Labeling as you go
Image
Label panels and deck
Label electrical drilled paths
Voids in panel to drill and fill
ID:(197, 0)
Sealing Behind Other Trades
Image
Changing the order of construction
Insulating combined with framing
ID:(191, 0)